TOPT-10DL Китай лаборатории чистой воды машины для дистиллированной воды

Type

Physicochemical analysis type Ultra pure Water Purifier

TOPT-10/20/30/40TL

TOPT-10/20/30/60DL

Scope of application

routine experiments,qualitative analysis,Buffer solution preparation

Quality of water obtained

Quality of pure water: ordinary pure water obtained meets standard for Grade III water as specified in Water for Analytical Laboratory Use:

Specification and Test Methods (GB6682-2008). Resistivity of high-purity water obtained ranges from 12 to 17 MΩ·cm at 25°C;

ordinary pure water obtained meets standard for Grade I water as specified in Water for Analytical Laboratory Use: Specification and Test Methods (GB6682-2008).

Technical indicators

TOC(ppb)

<20ppb

Microorganism

<1cfu/ml

Pyrogen (EU/ml)

Pore size of dead-end filter

adaptable to your need (0.01um, 0.05um, 0.1um, 0.2um)

Performance features

Microcomputer-controlled and touch-key operation, automatic preparation of pure water, Regulation of water flow

Adopts high precision water quality online monitoring system and Real-time online monitoring of quality of water obtained

, to ensure the reliability of water quality, ensure the quality of the experiment.

One machine to produce two kinds of water, pure water, ultrapure water, Pure water, ultrapure water outlet are equipped with dust cover

Fully enclosed bacteriostasis design

Automatic/manual cleaning and maintenance of pretreatment and reverse osmosis system

Control circuit adopts safe voltage, electrical and water thoroughly separation, avoid circuit aging damage caused by moisture inside, leaks.

Additional functions: Foot-operated switch; movable arm to get water; infrared remote control .

Working condition

BTP-T Ultra pure Water Purifier:

Raw water: tap water (TDS is more than or equal to 300; equipped with intensified pretreatment unit);

water intake pressure: 1.0 to 5.0 kg/cm²;

Temperature: 5 to 40°C ;

Power supply: 220V±10V/ 50Hz (power: 30 to 80W)

BTP-D Ultra pure Water Purifier:

Raw water: Deionized water, distilled water or reverse-osmosized water;

water intake pressure: 1.0 to 3.0 kg/cm²;

Temperature: 5 to 40°C

Power supply: 220V±10V/ 50Hz (power: 30 to 80W)

Water Yield

BTP-T: Water Yield:10/20/30/40L/H

Water flow rate: 1.5-2.0L/min(controlled)

BTP-D:Water Yield:10/20/30/60L/H

Water flow rate: 1.5-2.5L/min (controlled)

Dimension

TOPT-T; Dimension: 465x475x500mm  

TOPT-D: Dimension: 380x475x490mm